Posted by John on June 25, 2002 at 01:54:57:
In Reply to: Removing fender rails posted by Riku on June 21, 2002 at 09:24:13:
The original turn signals won't fit the fender ...only designed to be held in place with the screw passing thru the rails into the shaft.Must get different turn signals that have a threaded shaft so you can bolt them t hole in fender after removing rails. I think you have to remove 4 bolts on each side then the chrome rails can be lifted off. In removed my sissybar and rails then body filled the 3 holes toward the front and bolted in new turn signals thru the rear hole on the back part of the fender.Put a new cats eye tail light on to stock bracket after removing license plate light.Of course I repainted fender after bodywork.